Hi there,
SW: CCS 5.10HW: DM365
The same GEL file works fine in CCS 3.3 for years.In CCS5, the GEL command is issued again (unexpectedly) a few seconds after I triggered it manually.It slows down the code loading and is annoying.
Please suggest the solution.
Thanks & regards,Yulin.
Hi Yulin,
Sorry for the delayed response. Is this still an issue. If so, could you provide the GEL file? I'd like to take a look at it.
Thanks
ki
-----------------------------------
Don't forget to verify answers to your forum questions by using the green "Verify Answer" button.
Did you read the CCS Forum Guidelines & FAQ? If not, PLEASE read it. If you haven't read it in awhile, please read it again to see if any updates were made.
Having CCSv5 problems? Check out the CCSv5 Troubleshooting Guide
Click here to track an issue. Enter your bug id in the "Find Record ID" box
Hi ki,
Thanks for taking care of this.
Stuff of problem is attached. The shl.out should be manually moved to the place specified in the GEL.
3580.ccs5_GEL.zip
Regards,
Yulin.