TI E2E Community
Code Composer Studio
Code Composer Forum
Using C6713 DSK(CCS v3.1) with CCS v3.3
when I try to build model in Simulink for the C6713DSK board it gives the error below.
Error using ==> LinkCCS at 28Error while connecting to Code Composer Studio(tm):Error using ==> cu_compareAndWarnCCSVersions at 53This version of the Embedded IDE Link CC does not support your version of Code Composer Studio(TM) IDE. The Code Composer Studio(TM) version supported in this release is 3.3.Refer to the Embedded IDE Link CC data sheet for more information on product requirements.
CCS v3.1 came with the DSK. I have got the CCS v3.3 with me as well.
Can I install both or do I have to uninstall v3.1 before installing v3.3?
If I have to uninstall v3.1 can I still use the flash burn 2.8, drivers and target content which came along with the board?
a couple comments. First of all, yes you can have both 3.1 and 3.3 installed. Please use different directories.
A couple further notes. CCSv3.3 is not officially supported in Windows 7 and also note that after installing v3.3 you will likely want to upgrade to make sure you have the latest patches and support for it.
Please keep us informed.
As i mentioned in where this post originally was, http://e2e.ti.com/support/development_tools/code_composer_studio/f/81/p/184028/669485.aspx#669485
I managed to make them both work together (with windows XP). windows 7 even failed to complete the installation without the errors all the time.
Thanks for your valuable support.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.