This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I have a prototype board for the TMS320C5515. I have a simple waveform generation and detection utility running with a XDS560v2 Traveler Emulator. I have an EEPROM on board which I would like to program with a bootable file. I have bootable code which I was able to load and run successfully under CCSv4.2 using the EVM5515.
However , when I bought the emulator for my prototype board, I had to take the upgrade to CCSv5.1. I would like to know how to start the programmer in CCSv5.1. I haven't been able to find the correct documentation, although I have a rather extensive folder of pdf documents. Any help would be very much appreciated.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.