I have XDS560V2 connected to a new board that uses TMS320VC5416 DSP. The .out file for this board builds OK with CCSv5. The board is configured for host port boot. I can download the .out file via the host port and it runs OK (except for some details that I am now trying to debug). For detailed debugging I want to load the same .out file via JTAG using Spectrum Digital XDS560V2. On connecting the emulator to the board, all diagnostics can be run OK, and the SD Sd560v2Cnfg v5 utility can run all tests OK. When I try to debug via CCSv5 there are always errors reported in program verification. It appears that none of my actual .out file is being loaded via the emulator. ANy ideas anyone? Thanks!
Hello,
Trevor BrayWhen I try to debug via CCSv5 there are always errors reported in program verification. It appears that none of my actual .out file is being loaded via the emulator.
The cause of verification errors can vary quite a bit. Did you see the below wiki article on verification errors? It covers the vast majority of the causes:
http://processors.wiki.ti.com/index.php/Troubleshooting_CCS_-_Data_Verification_Errors
Thanks
ki
-----------------------------------
Don't forget to verify answers to your forum questions by using the green "Verify Answer" button.
Did you read the CCS Forum Guidelines & FAQ? If not, PLEASE read it. If you haven't read it in awhile, please read it again to see if any updates were made.
Having CCSv5 problems? Check out the CCSv5 Troubleshooting Guide
Click here to track an issue. Enter your bug id in the "Find Record ID" box