TI E2E Community
Code Composer Studio
Code Composer Forum
How to use EVM357 ARM Interrupt Control???
I've some problem in using EVM357 INTC vectors. The chip is Davichi TMS320DM357.
1, For EVM357, the vector table entry is Address = EBASE+(1*SIZE). So when I set EBASE, every interrupt (0-63) has it's own entity address. Then the question is, the content of this address is the address of my ISR function itself or AN instruction code for jumping to my ISR function?
2, For the EBASE register itself. It has limitation for address space of (0x0000 0000-0x03FF FFFF). Is that means my ISR service can not exceed that space. Because as the reference code of EVM357. All the code a link to the DDR2 space which address is from(0x8000 0000-0x8FFF FFFF). So is that means with this setting, I can not use the INTC service?
3, What should I do to change my setting to use the INTC?
This is the first time I using the TI platform. Expecting your professional answer. Thanks very much.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.