Lauterbach power debug interface / usb2

Constantin Wiesener

Hi,

i would like to use the power debug interface / usb 2 from lauterbach. Is there a way to integrate it into code composer studio. And how do I connect it to my hercules tm570 evaluation board. The current connector is jtag only.

Kind regards.

C.W.

over 10 years ago

0 Praveen Kumar Ravichandran over 10 years ago

TI__Expert 4550 points

Hi C.W.,

Do you intend to ask if CCS IDE supports connecting to a Hercules device through lautterbach power debug interface(emulator) ?

0 Constantin Wiesener over 10 years ago in reply to Praveen Kumar Ravichandran

Intellectual 540 points

Yes indeed.

0 Praveen Kumar Ravichandran over 10 years ago in reply to Constantin Wiesener

TI__Expert 4550 points

Hi CW,

To my understanding it doesnt support connecting through power debug interface. Anyways, I am movingthis thread to the CCS forum for someone to confirm it for you

Regards,
Praveen

0 desouza over 10 years ago

TI__Guru**** 168377 points

Hi,

Irrespective of the JTAG pod (I imagine you have this one), I was able to connect to a Lauterbach pod via their Eclipse plug-in a long time ago, but I am not sure if this is compatible with the latest CCS releases. You will have to check their documentation to verify dependencies and details.

Hope this helps,

Rafael

Code Composer Studio™︎

Code Composer Studio forum

Lauterbach power debug interface / usb2