Load Program Error during debug

Kyle Gregory

When trying to debug my project, I am getting the following error message:

Load Program Error.



File C:\<....>\Fixed_LT_FIFO.out: Load failed.

I have verified that the file exists at the specified location and I have tried cleaning the project and re-building it, but I still get this error. What is going on here?

over 10 years ago

0 Gautam Iyer over 10 years ago

Guru 192875 points

Hi Kyle,

Did you try changing the workspace?

Regards,

Gautam

0 Kyle Gregory over 9 years ago in reply to Gautam Iyer

Prodigy 160 points

I'm not sure how I would do that. If I change the workspace, wouldn't it close the project?

I did try swapping the development card with another identical one and it programs that one just fine.

0 Gautam Iyer over 9 years ago in reply to Kyle Gregory

Guru 192875 points

I did try swapping the development card with another identical one and it programs that one just fine.

Ohh! Seems like a hardware issue then. What you can do now is; check the voltage levels on the faulty board and try matching them with the schematics or the working one. There's a possibility that some component might've got damaged.

Regards,

Gautam

0 Kyle Gregory over 9 years ago in reply to Gautam Iyer

Prodigy 160 points

Seems to be that the battery was dying. Problem solved.

0 Gautam Iyer over 9 years ago in reply to Kyle Gregory

Guru 192875 points

That's Great, Kyle!

Goodluck & Regards,

Gautam

Code Composer Studio™︎

Code Composer Studio forum

Load Program Error during debug