debug problem code compressor - TMSF28035

Hi,

Have you set the target configurations correctly? Also, are you importing the example codes or are they custom ones?

Regards,

Gautam

thanks for the quick repaly , 

yes i set the target configurations correct and import example code , the build is seucss but the Debug Active Project is failed;

C28xx: Flash Programmer: Error encountered when writing to flash memory
C28xx: Trouble Writing Memory Block at 0x3f6000 on Page 0 of Length 0x1839
Cannot write to target 

yotam

Yotam, I hope your MCU is not in a locked condition. What you can check is download CCS Uniflash and use the unlock feature in it and then try programming using the same application. Let me know what you observe.

Regards,

Gautam

Gautam Hi,

thank you for anwsring yesterday i try to flash the memory card with uniflash but the program (uniflash) and now also the programming cc4 are now telling me the the chip is TMS320F28027 when the chip on the bord is TMS320F28035. The erorr messge is: canot find the device ...35 the dedcted device is ...27.

can you pls try to help me as soon as possible .

Yotam  

Yotam, I somehow feel your device has been permanently locked. Check this link for more info: 

http://e2e.ti.com/support/microcontrollers/c2000/f/171/t/115770.aspx

Regards,

Gautam

gautam Hi ,

after debaging i get this messge :

C28xx: Flash Programmer: Warning: The configured device (TMS320F28035), does not match the detected device (TMS320F28027). Flash Programming operations could be affected. Please consider modifying your target configuration file.
C28xx: Flash Programmer: Error erasing Flash memory.

pls try to help 

yotam