[MSP430] Unknown device show in CCSv5

Kaka

Guru 24520 points

Other Parts Discussed in Thread: MSP430FR5869

Hi community member,

Please let me confirm the following question.

[Question]

When my customer used the CCSv5.5 in order to program the MSP430FR5869, it showed "Unknown device".

However, if they used the CCS v6, this issue did not occurred.　　Does it ring a bell ?

Tool; MPS-FET430UIF

If you have any question, please let me know.

Best regards.

Kaka

0 Gautam Iyer over 9 years ago

Guru 192875 points

Hi Kaka,

I hope your CCS v5.5 is fully updated. I checked my CCS v5.5 and it supports the above device.

Regards,
Gautam

0 Kaka over 9 years ago in reply to Gautam Iyer

Guru 24520 points

Hi Gautam,
Thank you for your response.

Would you please show us how to confirm that the CCS v5.5 supports it?

Best regards.
Kaka

0 Gautam Iyer over 9 years ago in reply to Kaka

Guru 192875 points

Here's the New Project & Target Configuration Window:

Regards,

Gautam

0 Kaka over 9 years ago in reply to Gautam Iyer

Guru 24520 points

Thank you for sharing the windows.
My customer can recognized the FR5969 EVM on CCS by re-installing the CCSv5.5.

Best regards.
Kaka

0 Gautam Iyer over 9 years ago in reply to Kaka

Guru 192875 points

That's Great, Kaka!

Goodluck & Regards,
Gautam

Code Composer Studio forum