TI E2E Community
Code Composer Studio
Code Composer Forum
CCS4.1 F28335 Memory Window Q -number bug
The memory window in CCS4.1 does not allow to display Q-values larger than Q15 !
1. View Memory
2. F28335-target. Select address 0x3FE000 and "32-bit signed integer"
3. Right Click and select "Configure". The scroll down window does offer Q-values between 0 and 15.
Question: How can I display the sine wave lookup table at ROM-address 0x3FE000, which is in I2Q30-Format?
Thank you for reporting this; the bug SDSCM00035689 was filed today. Please check its status at the external bug database (the SDOWP link in my signature below).
Unfortunately there is no practical workaround other than displaying each value in the Watch window (where there's no limit to the Q value), but usually the engineering team addresses these issues in a timely manner.
I apologize for the inconvenience,
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.