This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

How to get started with CCS6 and Tiva C TM4C123G

Hi All,

Total newbie here. This isn't my first go around with tools or embedded.

Could I please get a hand starting out with the CCS and Launchpad TM4C123G? I was following a workshop (probably not closely enough) and it won't even try to compile, not knowing where /include is. I've got the com port open and can play with the ">" prompt. 

I installed like 4 different programs... can they make it any more difficult? 

I'll keep at it and reply if/when I figure it out.

Thanks,
Chris