• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 52 subscribers
  • Views 635 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/DRA746: CCS7 + BH-560BP setup failed in targetconnection.

Eugine Varghese
Prodigy 30 points
Part Number: DRA746

Tool/software: Code Composer Studio

Hi ,

Unable to connect target . TargetConnection is failing with CCS7 + BH-USB-560BP.

Not found Code Composer Studio Licensing information and point CCS to license file.

Thanks,

Eugine.

  • 0
    Prodigy 30 points
    Test Connection log:

    [Start: Blackhawk USB560-BP Emulator, 20-pin JTAG Cable_0]

    Execute the command:

    %ccs_base%/common/uscif/dbgjtag.exe -f %boarddatafile% -rv -o -F inform,logfile=yes -S pathlength -S integrity

    [Result]


    -----[Print the board config pathname(s)]------------------------------------

    C:\Users\DSANTH~1.ADH\AppData\Local\TEXASI~1\
    CCS\ti\0\1\BrdDat\testBoard.dat

    -----[Print the reset-command software log-file]-----------------------------

    This utility has selected a 560/2xx-class product.
    This utility will load the program 'bh560ubp.out'.
    Failed to open i/o connection (\\.\bh560ubp0)

    An error occurred while soft opening the controller.

    -----[An error has occurred and this utility has aborted]--------------------

    This error is generated by TI's USCIF driver or utilities.

    The value is '-250' (0xffffff06).
    The title is 'SC_ERR_ECOM_EMUNAME'.

    The explanation is:
    An attempt to access the debug probe via USCIF ECOM has failed.

    [End: Blackhawk USB560-BP Emulator, 20-pin JTAG Cable_0]
  • 0 in reply to Eugine Varghese
    TI__Guru**** 173310 points

    Please take a look at this page for the more common reasons for this error message, and troubleshooting tips.