CCS/TMS320F2809: Uniflash v3.4/v4.1 to Save Memory as .bin Format When CSM is Enabled

Ricky Zhang

Genius 9520 points

Part Number: TMS320F2809
Other Parts Discussed in Thread: UNIFLASH

Tool/software: Code Composer Studio

Hi, Champs,

My customer is using UniFlash v3.4 and v4.1 for memory saving with F2809, and here is his question.

When CSM is disabled, he can save memory as .bin format successfully every time.

When CSM is enabled, after CSM is unlocked successfully, he got very little chance to save memory as .bin format correctly.

Most cases he got all 0's in the .bin output file, but he can confirmed that it did been unlocked.

Can anyone take a look at it and tell where's the problem?

Best Regards,

Ricky Zhang

over 6 years ago

0 Ki over 6 years ago

TI__Guru**** 420760 points

Hi Ricky,
Thank you for bringing this to our attention. I will investigate this further when I am back in the office.

Thank you
ki

0 Ki over 6 years ago in reply to Ki

TI__Guru**** 420760 points

Hi Ricky,

Can you suggest to the customer to enable the option the option below to keep uniflash connected to the device:

Thanks

0 Ricky Zhang over 6 years ago in reply to Ki

TI__Genius 9520 points

Ki,

Thanks, it does fix the issue, however, we should have this information showed more clear for customer to enable as well.

Best Regards,

Ricky Zhang

0 Ki over 6 years ago in reply to Ricky Zhang

TI__Guru**** 420760 points

Ricky,
We have an existing enhancement where we will improve the usability of this further so that customer should not be confused anymore.

Thanks
ki

0 Ricky Zhang over 6 years ago in reply to Ki

TI__Genius 9520 points

Ki,

That's great. Thanks for team's effort.

Best Regards,

Ricky Zhang

Code Composer Studio™︎

Code Composer Studio forum

CCS/TMS320F2809: Uniflash v3.4/v4.1 to Save Memory as .bin Format When CSM is Enabled