CCS/launchxl-cc2650: Debugging with two different LAUNCHXL-CC2650 connected

Amit Maoz

Part Number: LAUNCHXL-CC2650
Other Parts Discussed in Thread: CC2650

Tool/software: Code Composer Studio

Hello

If I have 2 different LAUNCHXL-CC2650 connected to the computer through 2 different lines (COM5, COM7 e.g), how can I choose which one to upload the code and debug in CCS?

When I tried it the CCS decided by itself which one of the units to debug.

Thanks

Amit

over 6 years ago

0 Ki over 6 years ago

TI__Guru**** 420650 points

Hi Amit,
You can specify this via serial numbers. The CC2650 LP has XDS110 debug probe. See:
processors.wiki.ti.com/.../Multi-Emulator_Debug_with_CCS

Thanks
ki

0 Amit Maoz over 6 years ago in reply to Ki

Expert 2375 points

Hey Ki,

I have changed the serial numbers of the two LaunchXL units:

and updated the ccxml file:

Yet the debugger doesn't recognize one of the units:

Which is weird, because when I test the connection from the ccxml file it says the exact opposite - it says debug probe_0 has an error and debug probe_1 is good: