CCS/AWR1642: C/C++ debug

user5034615

Part Number: AWR1642

Tool/software: Code Composer Studio

when I select menu Run>Run Configuration in CCS and in C/C++ View, way I can not see C/C++ local Application in the Run Configuration diagloge BOX? I only can see C/C++ local Remote Application.

over 5 years ago

0 JohnS over 5 years ago

TI__Guru**** 159725 points

Are you trying to run an application on your host PC or run an application on the AWR1642?

While CCS is based on Eclipse when debugging a TI embedded device you want to be using the provided CCS Edit and CCS Debug perspectives. We are not using GDB as our debugger, we provide our own debugger.

The Getting Started Video show the general flow for launching the debugger: www.youtube.com/watch

Regards,
John

0 JohnS over 5 years ago in reply to JohnS

TI__Guru**** 159725 points

Have you taken a look at the video? Are you trying to debug the application on the AWR1642 or are you trying to run it on your host machine?

John

0 JohnS over 5 years ago in reply to JohnS

TI__Guru**** 159725 points

As we have not heard back from you I am going to assume that you have gotten past this and I will close the thread. If this is not the case please feel free to reply or post a new thread.

Regards,
John

Code Composer Studio™︎

Code Composer Studio forum

CCS/AWR1642: C/C++ debug