• State TI Thinks Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 2 answers
  • Subscribers 55 subscribers
  • Views 617 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F280049: XDS110 Sch file and gerber file

Joe Zhu
Intellectual 2540 points
Part Number: TMS320F280049
Other Parts Discussed in Thread: TMDSEMU110-U

Hi Champion,

Do you know where I can find XDS110 design file and firmware? My customer want to do it themselves.

Thanks!

BR

Joe

  • 0
    TI__Guru** 109165 points
    Joe,

    Moving it to CCS team. Someone there should be able to help you on this.

    Regards,
    Vivek Singh
  • 0 in reply to Vivek Singh
    TI__Guru**** 168377 points
    Joe,

    Do you mean the schematics of the standalone XDS110 Debug Probe (TMDSEMU110-U)? If so, this information is not public.

    Your customer can, however, use one of the designs present in the launchpads such as the MSP-EXP432P4111.

    The firmware is available in any version of CCS under the directory mentioned in the procedure below:
    processors.wiki.ti.com/.../XDS110

    Hope this helps,
    Rafael
  • 0 in reply to desouza
    TI__Intellectual 2540 points
    Hi Rafeal,

    My customer want to use it debug C2000, sorry I am not find where can download the emulator firmware, can you help to give me more detail guide?

    Thanks
    BR
    Joe
  • 0 in reply to Joe Zhu
    TI__Guru**** 168377 points
    Joe,

    The reference I sent before shows the directory where the XDS110 utlities and the firmware file is located (named firmware.bin).

    A blank XDS110 debug probe requires both the bootloader and then the firmware pre-programmed for it to work.

    Please check section 3.7.3.2 of the XDS110 User's Guide (SPRUI94) - it contains an example on how to program a new bootloader and firmware on the XDS110 design. You want to look for the item "How to program a new bootloader and firmware into the XDS110 probe:"

    If the design is properly done, this should be enough to have a fully functional XDS110 Debug Probe.

    Regards,
    Rafael