Need SwitchPro to design TPS54618

Albert Ng

Prodigy 200 points

Other Parts Discussed in Thread: TPS54618, SWITCHERPRO

I am using version 3.17.0.0, and doesn't support TPS54618.

Is or will there an updated version of SwitchPro does it? Thanks.

over 12 years ago

0 JohnTucker over 12 years ago

TI__Guru**** 191445 points

No, there will be no more Switcherpro developement. All new support will be in Webench.

0 Akshay Mehta over 12 years ago

TI__Genius 15810 points

Hello Albert,

The TPS54618 is now supported on Webench. Please visit this link: http://www.ti.com/product/tps54618 to create a design. Hope this was helpful.

Regards,
Akshay

0 Surinder Singh over 12 years ago in reply to Akshay Mehta

TI__Expert 3085 points

Yes, you are right, TPS54618 is not supported in SwticehrPro. There is no more development planned for SwitcherPro. Our last release was version 3.17. This part is now available in WEBENCH for you to use.

Regards

surinders

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

Need SwitchPro to design TPS54618