SABER simulation models

Sutej Reddy

Other Parts Discussed in Thread: UCC28950

Can anyone let me know How can I get SABER simulation models for TI products? Normally manufacturers provide both SPICE and SABER models....but I couldnt see any SABER models on TI Website. In case Manufacturers do not provide SABER Models one can convert SPICE models into SABER models provided SPICE models are not encrypted. As TI's SPICE models are encrypted I dont have this option either.

over 12 years ago

0 John Miller - Sensing over 12 years ago

TI__Mastermind 33170 points

Sutej,

I am a modeling engineer in Analog eLab.
We emphasize SPICE and IBIS models for our devices

Which devices interest you?

Regards,

John

0 Nikhil Gupta (Product Folder Models) over 12 years ago

TI__Mastermind 39210 points

Sutej,

If you need to request the unencrypted models for TI parts, you will need to contact your local TI AFA/FAE. They can get you the unencrypted models, but you might need an NDA with TI.

Best regards,

Nikhil

0 Vijayalakshmi Ramesh over 9 years ago in reply to John Miller - Sensing

Prodigy 30 points

Hi,.

Can i get the LM1054 pspice model for my simulations.

If not any other switched capacitor with voltage regulator,pspice model.

I need to use it with the saber simulator.

I tried using LM220670,the model is encrypted and could not be used.

Please can you help me on this.

Regards

Vejeu

0 Nikhil Gupta (Product Folder Models) over 9 years ago in reply to Vijayalakshmi Ramesh

TI__Mastermind 39210 points

I could not find either of these parts in TI's portfolio - LM1054 or LM220670.

0 Ni Qiang over 9 years ago in reply to Nikhil Gupta (Product Folder Models)

Prodigy 60 points

Hi,

I want to use the TI power control IC for simulation by saber,but i just can find the spice model and i cannot change it to Saber model. Can you give some helps. Thanks

0 Nikhil Gupta (Product Folder Models) over 9 years ago in reply to Ni Qiang

TI__Mastermind 39210 points

Ni,

Which part is this?

Thanks,

0 Ni Qiang over 9 years ago in reply to Nikhil Gupta (Product Folder Models)

Prodigy 60 points

UCC28950. Thanks.

0 Nikhil Gupta (Product Folder Models) over 9 years ago in reply to Ni Qiang

TI__Mastermind 39210 points

You will need the unencrypted PSpice model for this. For this we will need an NDA with your company. Please contact your local TI Representative for this. However note that the model was developed in PSpice and so there is no guarantee that it will work in Saber.

Thanks,

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

SABER simulation models