TPS84621 TINA-TI model

Rafael Palacio Setien

Prodigy 20 points

Other Parts Discussed in Thread: TPS84621, TINA-TI, TPS84620

Hi Nikhil,

I am trying to convert the model TPS84621 and I get the same error as explained in the first post of this thread.

"Invalid Device : $CDNENCSTART:Line 48

Could you help me ?

Thanks a lot,

Rafael

over 11 years ago

0 Nikhil Gupta (Product Folder Models) over 11 years ago

TI__Mastermind 39210 points

Hi Rafael,

The PSPICE model is encrypted and can not be imported directly into TINA-TI. I will get back to you when we translate this model to TINA-TI.

Best regards,

Nikhil

0 Nikhil Gupta (Product Folder Models) over 11 years ago in reply to Nikhil Gupta (Product Folder Models)

TI__Mastermind 39210 points

Hi Rafael,

Please find attached the TINA-TI model for TPS84621. It will also be released to the product folder in a few days.

Best regards,

Nikhil

3716.TPS84621_TRANS.TSC

0 Rafael Palacio Setien over 11 years ago in reply to Nikhil Gupta (Product Folder Models)

Prodigy 20 points

Thanks a lot!. Do you have also a TINA schematic for the TPS84620 ? This one is RoHS compliant while TPS84621 has TBD on that field. Thus, I have to select the TPS84620 for my design .

The schematic of the reference design for the TPS48620 also lacks for meaningful information . Do you have any updated schematic for the ref design ?

Regards,

Rafael

0 Nikhil Gupta (Product Folder Models) over 11 years ago in reply to Rafael Palacio Setien

TI__Mastermind 39210 points

Hi Rafael,

Currently we do not have any model for TPS84620. Can you use the TPS84621 model for your testing as it is very much similar to TPS84620 from a working point of view.

Best regards,

Nikhil

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TPS84621 TINA-TI model