Missing TIna file

Will Jarrett

Intellectual 2640 points

Other Parts Discussed in Thread: LM5118

I have a customer who is having trouble getting TIna to work with the LM5118.

Tina says he is missing a "lm5118_trans.tld" file. Can you help me determine the issue? Thank you so much!

over 9 years ago

0 Nikhil Gupta (Product Folder Models) over 9 years ago

TI__Mastermind 39210 points

Jarrett,

You do not need the TLD file to run the simulation. You can open the file marked "LM5118 TINA-TI Transient Reference Design" and use that as a starting point, or copy the LM5118 model from there to a new schematic and use that as your starting point.

Thanks,

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

Missing TIna file