Importing TI's Spice Models into Tools other than PSpice and TINA-TI

Closing this post, but feedback is welcome.

Thanks for posting this information NIkhil!

Regards,

Janet

Some feedback -  Is there a problem with that link? When I try I get an error message:

"[FaultEvent fault=[RPC Fault faultString="Send failed" faultCode="Client.Error.MessageSend" faultDetail="Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Status 500: url: 'http://webench.ti.com/wb5/messagebroker/amf'"] messageId="F8FC1D67-488D-D5F4-FF02-225C978D099D" type="fault" bubbles=false cancelable=true eventPhase=2]"

Hello,

I have seen this error come up occasionally when open the link to Spice Rack. Please try again and it will usually go away. You could also try it in a different browser if a simple refresh does not work.

Cscott,

You can also click on the FAQ button (upper right in the Forum), select Spice Model FAQs (2.0), select General Modeling Questions (2.1) and click on the Importing TI's Spice...

This has worked for me when I got the webpage error before.

Indeed you are correct Nikhil. Third time's the charm!

Thx also to Britt for your idea.