TINA-TI simulation model for TPS61230

David Bayer

Prodigy 190 points

Other Parts Discussed in Thread: TPS61230, TINA-TI

Could TPS61230 be ported to TINA-TI?

Thanks

over 8 years ago

0 Nikhil Gupta (Product Folder Models) over 8 years ago

TI__Mastermind 39210 points

David,

We will plan to enable the export of this simulation from WEBENCH to TINA-TI. Once this is done, we will send you the instructions on how you can get the TINA-TI model.

Thanks,

0 Mark Pearson over 8 years ago in reply to Nikhil Gupta (Product Folder Models)

TI__Genius 12705 points

David,

You can also import a PSPICE model into TINA too:

Mark Pearson

0 Nikhil Gupta (Product Folder Models) over 8 years ago in reply to Mark Pearson

TI__Mastermind 39210 points

David,

That document holds true only if the model that is being imported is unencrypted. The TPS61230 model on the web is encrypted and can not be imported into TINA-TI directly.

Regards,

0 Mark Pearson over 8 years ago in reply to Nikhil Gupta (Product Folder Models)

TI__Genius 12705 points

Ah - yes, thank you for pointing that out. A VERY GOOD POINT Nikhil !

0 Mahavir Jain over 8 years ago

TI__Intellectual 2405 points

Hello David,

The TINA-TI export feature for TPS61230 has been enabled. You can now export the WEBENCH design into TINA-TI and simulate it locally. Please follow the steps in e2e.ti.com/.../3142.simulation-export-from-webench-tools-to-tina-ti to export the design to TINA-TI.

Thanks!!

Best Regards,
Mahavir Jain.

0 David Bayer over 8 years ago in reply to Mahavir Jain

Prodigy 190 points

Thanks Nikhil, Mahavir & Mark. I exported it successfully.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA-TI simulation model for TPS61230