Hello Team,
Is TPS92513 currently supported by WEBENCH?
The product page of TPS92513 has Webench simulate window as follows.
However I can't start designing for this device when I clicked "Open Design" bottom.
I confirmed LM3404 is supported by Webench.
Are there any alternatives (e.g. Excel)?
Best Regards,
Hidetoshi Matsunami
Hello Gupta,
Thank you for your reply.
I tried to simulate again and I could a design for TPS92513 if I select a LED with footprint = 20.
On the other hand, I couldn't create a design if I select a LED with footprint = 0
Best Regards,
Hidetoshi Matsunami
Matsunami-san,
In this case, since Vin min is 12V and Vf of the LED is 11.5V, the max duty cycle of the device is vioalted, hence it id not recommended for this design. You can actually find this root cause of design not getting shown by clicking on the "Show Why Other Parts Were Not Found" button. To solve this, please increase Vin min to about 14V.
