[ TL972 ] SPICE model error on OrCAD

Kenichiro

Other Parts Discussed in Thread: TL972

[ TL972 ] SPICE model error on OrCAD

Hi,

My customer try to use the SPICE model of TL972 on OrCAD, however an error message below has been seen.

I have searched this code (ORCAP-15052) on the web, but not much information...
Can you help me to debug this error??

Thanks,
Ken

over 8 years ago

0 Ron Michallick over 8 years ago

TI__Guru*** 139826 points

Kenichiro san

I will move your post to correct forum.

0 Britt Brooks - Online Design Tools over 8 years ago

TI__Mastermind 41310 points

Ken,

Did you customer refer to the session log to see what the error was?

I downloaded the model and the simulation works correctly for DC, AC, and transient simulations.

Can your customer provide the zipped directory of their OrCAD project?

0 Kenichiro over 8 years ago in reply to Britt Brooks - Online Design Tools

Mastermind 9165 points

Hi,Britt,

Thank you for your support! My customer has received feedback from Cadence about error code "ORCAP-15052".
According to customer, this error is related to wrong/invalid setting on OrCAD.
They corrected this and confirmed the model works. No issue on your model.

Thanks,
Ken

Ron, thank you for moving my post to correct forum.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

[ TL972 ] SPICE model error on OrCAD

[ TL972 ] SPICE model error on OrCAD