TINA/Spice/TPS57060-Q1: TINA Error - Format '%s' invalid or incompatible with argument

Dan,

Please share the problematic TINA-TI TSC file for us to debug.

Thanks,

webench_design_4884201_16.tscHi Nikhil-

Thanks for the quick response. Please see the attached file.

Thanks for Your suggestion and it works, but I found there are still  some problems like following:

 

Figure 1 shows, the virtual oscilloscope sometimes paused at starting, there is no waveform appearing in the virtual display window. 

Figure 2 shows, the virtual signal analyzer doesn’t work either with the same error in whenever I run this function.

 

I think the root cause still should  be found out, I will collect my questions in my using Tina-Ti and feedback to you.

Hi Chen -

To clarify for the team, the Oscilloscope is now working properly, but you're getting an error on the Signal Analyzer, correct?

Thanks,
Dan

Chen,

Again, I need to know why you are using the virtual oscilloscope and the virtual signal analyzer for this kind of a simulation.

Thanks for any additional information you can provide.

Hi Dan

The error on the signal analyzer is showed as the figure above.

Thanks,

Chen

Hi Britt

I use the virtual oscilloscope and signal analyzer because I can see the wave change in real time when I do some change in the schematic, Dan suggested me to use the transient analysis but it takes a long time to show the result.

Thanks,
Chen