TI E2E Community
WEBENCH® Design Center
Power and Lighting Tools Forum
TPS40140 design problem
I have created a design for the TPS40140 using SwitcherPro 3.17.
Two phase single output converter model.VinMin: 10.8V VinMax: 13.2V Vout: 1.2V Iout: 32A
I would like to use MOSFET IRFH7914 at high-side and 2 no.s of IRFH7932 at low-side, but the switcherpro is not letting me to use 2 IRFH7932 at low side,
and secondly when i select high side/low side mosfet then automatically the other one i.e. low side /high side mosfet is also becoming the same part. Please help me how to proceed.
Thanks & Regards,
Using your inputs in both the online and desktop v3.17 of SwitcherPro, I was unable to reproduce your problem. Infact, SwitcherPro fails to create this design.
Can you please let me know if the inputs entered were different or modified using 'Edit inputs' option?
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.