For the LM5088 No "custom Part" possibility exist.
Please advise how to enable this please
Regards
Jørgen
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
For the LM5088 No "custom Part" possibility exist.
Please advise how to enable this please
Regards
Jørgen
Hi
Please find at the bottom the schematic.
It is synchronised to run at 300kHz.
I would like freely chose other loop components and output filter components and then run a bode plot simulation based on the updated schematic.
example: To change Ccomp2 the custom possibility is NOT enabled. See below:
Thank you
Hi Howard,
OK, when will Inverting Buck-Boost be transferred to the new platform??
Do you have some recommendations how to manually calculate the Bode transfer function manually or semi automatic for the Inverting Buck-Boost topology??
Rgds,
Jørgen
Sorry Jorgen,
I know we are planning to update our IBB software but I don't know when.
Since the IBBs were old, I don't have any documentation to share. I do have an Ispice model, will be happy to share it..
HI Howard,
Sorry I do not know Ispice can you give me a link or otherwise give me access to the program, if yes please send me the Ispice file.
rgds
Jørgen
Hi Jorgen,
Can you please send me an email contact and I will share the model with you. You can reach me at howard.chen@ti.com