• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 39 subscribers
  • Views 527 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RE: Power and Lighting Tools Forum: I purchased a converter designed from webench. I received a confirmation and a link to the design files with instructions for building and so forth. The link doesn't work. http://webench4.ti.com/cgi-bin/bidoc.cgi?Id=

Tony Banks
Prodigy 110 points
Other Parts Discussed in Thread: SWITCHERPRO
Thanks for your help Dien.
 
Tony
 
From: Dien Mac [mailto:bounce-1879676@mail.e2e.ti.com]
Sent: Monday, February 23, 2015 4:25 PM
To: switcherpro@mail.e2e.ti.com
Subject: Power and Lighting Tools Forum: I purchased a converter designed from webench. I received a confirmation and a link to the design files with instructions for building and so forth. The link doesn't work. webench4.ti.com/.../bidoc.cgi (...
 

 
A Message from the TI E2E™ Community
Texas Instruments

 

Dien Mac replied to I purchased a converter designed from webench. I received a confirmation and a link to the design files with instructions for building and so forth. The link doesn't work. webench4.ti.com/.../bidoc.cgi (NO ROUTE TO HOST error messa.

Hi Tony,

Thanks for using WEBENCH for your design and I'm sorry about the inconvenience.

There is some change in the code recently that cause the URL to break. We have identified the problem and assign a developer to work on it.

In the meanwhile, I will send you an email to view the assembly document.

Regards

 

Dien Mac

WEBENCH Design Center

(669) 721-6203

 
 

You received this notification because you subscribed to the forum.  To unsubscribe from only this thread, go here.

Flag this post as spam/abuse.