This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS53515EVM / 0ohm resistor between PGND and AGND

Hi,

Please let me ask about  0ohm resistor between PGND and AGND. 

I know that the Star Ground Point is created at this 0ohm resistor on bottom layer, and this pattern should be shorted on PCB without this 0ohm resistor. Is my understanding correct? Then please let me know why you do not short it but use 0ohm resistor.

Best Regards,

Sonoki / Japan Disty