WEBENCH® Tools/LM5017: I used LM5017 to design t"VIN=27V and Vout =27V/ 200ma" . But when I simulated it and I found output is 24V shown in WeBench.

Eggsy Pang

Part Number: LM5017

Tool/software: WEBENCH® Design Tools

Hi Team,

I used LM5017 to design t"VIN=27V and Vout =27V/ 200ma" . But when I simulated it and I found output is 24V. You can open below link. I didn't know why. Do you have any suggestions?

https://webench.ti.com/appinfo/webench/scripts/SDP.cgi?ID=0F4D14356EB4FEC3

over 5 years ago

0 Kiran Kumar10 over 5 years ago

TI__Intellectual 1625 points

Hi Eggsy,

We are looking into the issue and will get back to you soon on this.

Thanks,
Kiran Kumar

0 Eggsy Pang over 5 years ago in reply to Kiran Kumar10

TI__Expert 4985 points

Hi Kumar,

Do you have any update?

0 Kiran Kumar10 over 5 years ago in reply to Eggsy Pang

TI__Intellectual 1625 points

Hi Eggsy,

We are still looking into the issue.
This might take bit more time to debug the issue as hierarchical SPICE model is not available for this device.

Thanks,
Kiran Kumar

0 Kiran Kumar10 over 5 years ago in reply to Kiran Kumar10

TI__Intellectual 1625 points

Hi Eggsy,

We have fixed this issue now. You will be able to see the latest updates on ti.com in our next release.

Thanks,

Kiran Kumar

0 Eggsy Pang over 5 years ago in reply to Kiran Kumar10

TI__Expert 4985 points

Hi Kumar,

May I know when we can use it?

Thanks!

0 Kiran Kumar10 over 5 years ago in reply to Eggsy Pang

TI__Intellectual 1625 points

Hi Eggsy,

We are aiming to release by end of August and also we will update you once released.

Thanks,
Kiran Kumar

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

WEBENCH® Tools/LM5017: I used LM5017 to design t"VIN=27V and Vout =27V/ 200ma" . But when I simulated it and I found output is 24V shown in WeBench.