WEBENCH® Tools/TMS320C6748: WEBENCH ERROR: Could not get the PMIC design

user1854915

Part Number: TMS320C6748
Other Parts Discussed in Thread: TPS650250, TPS65910

Tool/software: WEBENCH® Design Tools

Hi,

My project is based upon TMS320C6748 + XILINX XC6SLX16, and i tried to get the PMIC design by WEBENCH but failed. The error as below. I have tried several times but the error is not solved. How could i get the PMIC power design for TMS320C6748 + XC6SLX16.

Best Regards,

Kevin Clooney

over 5 years ago

0 Amod Vaze over 5 years ago

TI__Mastermind 21755 points

Thanks Kevin for reporting the issue. I am able to reproduce it and we will work on finding the root cause. If I find an alternative approach to create this design, I will let you know here.

Regards,
Amod

0 Amod Vaze over 5 years ago in reply to Amod Vaze

TI__Mastermind 21755 points

Hi Kevin,

We found out that this is a server time out issue and it could take a while to get this fixed. I found some references which may be of some help.

1. TPS650250 reference design for the Xilinx FPGA (www.ti.com/.../TIDA-00716 )
2. TPS65910 user guide for TMS320C6748 (www.ti.com/.../swcu071b.pdf)

Hope this helps.

Regards,
Amod

0 user1854915 over 5 years ago in reply to Amod Vaze

Prodigy 180 points

Hi Amod,

Thanks for your advice. The two PMICs are used for my design, and i also hope that the WEBENCH issue could be solved.

Best Regards,
Kevin Clooney

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

WEBENCH® Tools/TMS320C6748: WEBENCH ERROR: Could not get the PMIC design