This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] DLPDLCR2000EVM: BBB Cape Overlay Customization

Genius 15345 points

Replies: 1

Views: 2780

Part Number: DLPDLCR2000EVM

All,

When using the DLP LightCrafter Display 2000 EVM, there are some situations where you may want to use the EVM with a system that does not have native support for the EVM's drivers. An example of this is using a custom operating system image based on an older release of Debian that has various software packages or drivers that is useful for a particular project. Below is a download for the cape overlay file and EEPROM data which can be used to install the driver on any BeagleBone release from scratch.

/cfs-file/__key/communityserver-discussions-components-files/94/7077.DLPDLCR2000_2D00_00A0.dts

/cfs-file/__key/communityserver-discussions-components-files/94/3583.dpp2601_5F00_eeprom.dump

To install the cape overlay, follow the instructions available at the following page:

https://github.com/beagleboard/bb.org-overlays

https://cdn-learn.adafruit.com/downloads/pdf/introduction-to-the-beaglebone-black-device-tree.pdf

If a post answers your question, please click the "Verify Answer" button.

1 Reply

  • Keep in mind that, when using this approach, you may need to manually load the cape overlay or set up your system to enable it on boot.


    Best Regards,

    Philippe Dollo

    If a post answers your question, please click the "Verify Answer" button.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.