DLPDLCR2000EVM: BeagleBone Black Driver Installation Issues

Connor Fries

Part Number: DLPDLCR2000EVM

I am currently trying to set up my BeagleBone Black to the DLPDLCR2000EVM and I'm having trouble downloading the drivers for the BeagleBone Black. I am using the Windows 10 operating system. Any help or suggestions would be greatly appreciated.

over 5 years ago

0 Philippe Dollo over 5 years ago

TI__Mastermind 28005 points

Connor,

Welcome to the E2E forums, and thanks for your interest in our DLP technology.

To clarify, it sounds like you are having trouble with the BeagleBone Black itself, rather than the EVM cape overlay. Is this correct? The BeagleBone Black is compatible with Windows 10. A tutorial on how to set it up with your computer is provided here:
beagleboard.org/getting-started

I hope this helps. Let me know how I can assist you further.

Best Regards,
Philippe Dollo

0 Connor Fries over 5 years ago in reply to Philippe Dollo

Prodigy 20 points

Hello Philippe,

Do I have to download the Debian image before updating the drivers? If so, then this is the source of my problem.

Thanks,
Connor Fries

0 Philippe Dollo over 5 years ago in reply to Connor Fries

TI__Mastermind 28005 points

Connor,

If you have the right debian image (Debian Jessie 8.9), the drivers will already exist on the BeagleBone Black for the EVM and no installation is required at all.

Best Regards,
Philippe Dollo

DLP®︎ products

DLP products forum

DLPDLCR2000EVM: BeagleBone Black Driver Installation Issues