This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLPDLCR2010EVM: I want to extract batch files in firmware.

Part Number: DLPDLCR2010EVM

HI everyone

I want to extract the batch file from the firmware as shown in the title.

To change Keystone, I made a batch file and updated it with firmware.

However, the operation is not normal, so I would like to compare it with mine by reading the batch file of the basic firmware you provide.

So I tried to open the firmware and find a way to read it but I can't make it.

Can you provide the batch file in the firmware by any chance?

Also, I want to make my software in Factory Initialization, but I don't know how.

  • Jang,

    Which version of the LightCrafter Display GUI are you using? Furthermore, what batch files are you attempting to run on your system? If possible, please share more information about what you are trying to do with batch files on your system so we can assist you further.

    It looks like you have made multiple threads on this topic. I will request that we continue discussion in the thread linked below:
    e2e.ti.com/.../734753

    Best Regards,
    Philippe Dollo
  • Hello Jang,

    It looks like you have created the same ticket for this issue " e2e.ti.com/.../734753 ", and our expert is working on that ticket.

    So, I am closing this ticket, you can continue ask the experts on other ticket.

    Thanks,
    Navneet