DLP3010EVM-LC: What is the connectors of the cable between LEDs and the display board

Hiroyuki Oka

Intellectual 255 points

Part Number: DLP3010EVM-LC

I want to make the cable longer between LEDs and the display board.

So please let me know the connectors' product names of the cable.

- I marked the connectors in the following image:

over 4 years ago

0 Philippe Dollo over 4 years ago

TI__Mastermind 28005 points

Hello User,

For BOM information on our systems, I recommend you see the BOM zip package on the associated reference design page.

https://www.ti.com/tool/TIDA-080003

See the bottom of this page for links.

I hope this helps.

Regards,

Philippe Dollo

0 Vivek Thakur over 4 years ago

TI__Mastermind 22830 points

Hi,

The following reference design is based on the DLP3010EVM-LC EVM.

http://www.ti.com/tool/TIDA-080003

The LED cable connector is in the display board. Please refer to the schematic of the display board. It is J2 connector and described in the BOM file.

The part number is S4B-EH(LF)(SN) and manufacturer is JST.

regards,

Vivek

0 Hiroyuki Oka over 4 years ago in reply to Vivek Thakur

Intellectual 255 points

Dear Mr. Vivek Thakur

Thank you for your information.

I also want to know the connector to the opposite side of LED cable.

I estimate it is the Molex Pico-SPOX Series (1.5mm pitch).

I will buy and try it.

I have resolved this question.

0 Vivek Thakur over 4 years ago in reply to Hiroyuki Oka

TI__Mastermind 22830 points

Tank you.

regards,

Vivek

DLP®︎ products

DLP products forum

DLP3010EVM-LC: What is the connectors of the cable between LEDs and the display board