Hi sir,
Greetings,
I have a dlp4500 and have a question about the trigger-in terminal
I would like to know the maximum voltage limit for its trigger in.
Thank u in advance.
Regards,
Mark.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Mark,
Are you using TI's LightCrafter EVM or your own design board based on the reference design provided by the TI.
Please check this following document "section : Recommended Customer Action" for referring the trigger voltage : http://www.ti.com/lit/er/dlpt005a/dlpt005a.pdf
Thanks,
Navneet
If a post answers your question, please click the "Verify Answer" button.