Texas Instruments (TI) DLP® support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search DLP® technology content or ask technical support questions on advanced light control algorithms, display, projection and automotive applications. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
This thread will overview two new diagnostic tools to aide in system debugging, made by the DLP Pico Applications team.
1. Compatible Parts
Both tools are compatible with any DLPC342x, DLPC343x, DLPC347x controller.
2. Where to find these tools
As…
Other Parts Discussed in Thread: DLPC910 , DLPC900 , DLPC410 , DLPLCRC900EVM These FAQs provide users with basic guidance for debugging when encountering issues with the DLPC410, DLPC900, and DLPC910 EVMs. It offers steps for resolving common issues and includes…
Part Number: DLPLCRC900EVM Other Parts Discussed in Thread: DLPLCRC900DEVM , DLPC900 , DLP6500FYE
The EVMs come in two models the DLPLCRC900EVM single controller board and the DLPLCRC900DEVM dual controller board. There are some similarities between the…
Part Number: DLPC4422 Other Parts Discussed in Thread: DLP660TE ,
Hi team,
Customer has some questions
I am using a DLP4422 with a DLP660TE. I mistakenly tried to upload an image to the DMD and it said to upload a flash image file and save on the bootloader…
Part Number: DLPDLCR230NPEVM
The DLPDLCR230NPEVM requires the use of a Raspberry Pi to interface with the EVMs onboard controller. The setup process and use of this EVM are very different from how we interact with our newer EVMs. This guide is meant…
Other Parts Discussed in Thread: USB2ANY , DLPDLCR4710EVM-G2 In order to establish communication with many of the DLP® Pico chipsets it is necessary to use an USB to I2C adapter. The 34xx platforms that are able to be connected directly into a PC have a…
Part Number: DLPC3430 Other Parts Discussed in Thread: DLPDLC-GUI , DLP4710EVM-LC
Corrupted flash images can occur when a flash process through the GUI is interrupted or otherwise fails. An attempt to re-flash a DLP Pico EVM or system. The following process…
Other Parts Discussed in Thread: DLPDLCR3310EVM , DLPDLCR471TPEVM DLP Pico provides two different GUIs, a Display GUI and Light Control GUI , to flash firmware images onto an Evaluation Module (EVM).
Display GUI
For use when flashing EVM-specific firmware…