DLPLIGHTCRAFTER: LightCrafter's power socket

Ryuji Hirayama

Part Number: DLPLIGHTCRAFTER

Unfortunately, digi-key power supply you suggest is now out of stock. So I am thinking to use the following one instead.

I would like to know which type of connector works for LightCrafter's power socket. I mean, positive inside or positive outside?

https://www.rapidonline.com/ideal-power-25hk-aj-050a300-cp-18w-5vdc-3a-plugtop-desktop-psu-85-3115

Thank you very much.

over 6 years ago

0 Philippe Dollo over 6 years ago

TI__Mastermind 28005 points

User,

Thanks for your interest in our DLP products, and welcome to the E2E forums,

I'll take a look at the system and provide you a recommendation in due course. Thanks for your patience.

Best Regards,
Philippe Dollo

0 Philippe Dollo over 6 years ago in reply to Philippe Dollo

TI__Mastermind 28005 points

User,

Based on the LightCrafter user's guide, you should be able to use any DC power supply with the following specification:

> 5V, 2A to 3A rating
> Inner plug diameter: 0.7 mm
> Outer plug diameter: 2.35 mm
> Plug length: 9.5 mm
> Negative center

This can be found on page 15 of the user's guide:
www.ti.com/.../dlpu006e.pdf

Best Regards,
Philippe Dollo

DLP®︎ products

DLP products forum

DLPLIGHTCRAFTER: LightCrafter's power socket