DLPC350: Peripheral Configuration is not saved in .ini file

Uryyy

Part Number: DLPC350

I'd like to know how to initialize "Peripheral Control configurations" when lightcrafter4500 is power on. I tried Save Solution, but it seems that the .ini is not updated about GPIO configurations.

over 5 years ago

0 Sanjeev over 5 years ago

TI__Mastermind 30875 points

Hi Uryyy,

Unfortunately the GPIO configuration settings not stored in the solution, you have to set every time after power-on through command interface.

Regards,

Sanjeev

DLP®︎ products

DLP products forum

DLPC350: Peripheral Configuration is not saved in .ini file