DLPLCR4500EVM: Aspheric Lens replacement Optics Path Modifications / Specs

Gaby Reyes

Part Number: DLPLCR4500EVM

Hello,

While replacing a burnt fly eye in our Lightcrafter 4500 the aspheric condenser lens broke, is there a way to figure out what the exact specs (focal length) of this lens are? I believe I found a compatible replacement but I'm not 100% sure.

Best Wishes,

Gaby

over 5 years ago

0 Philippe Dollo over 5 years ago

TI__Mastermind 28005 points

Gaby,

Unfortunately, the optical engine design is typically provided by a third party, so TI does not have the exact specifications for components such as the lenses. In this case, the optical engine (IPD 1231) is provided by iView. You may want to try contacting them for detailed specifications.

I hope this helps.

Best Regards,
Philippe Dollo

0 Gaby Reyes over 5 years ago in reply to Philippe Dollo

Prodigy 20 points

Hello Philippe,

Thank you for the clarification! I have been unsuccessful in my attempts to contact iView, is there any chance you could provide me with their website/contact info?

Best Wishes,

Gaby

0 Philippe Dollo over 5 years ago in reply to Gaby Reyes

TI__Mastermind 28005 points

Gaby,

You can try contacting iView with this information:
www.ti.com/.../companyfolder.tsp

Alternatively, there is some limited spec sheet information available from distributors, such as here:
www.wpgdadago.com/getAdDetailPage

I hope this helps.

Best Regards,
Philippe Dollo

DLP®︎ products

DLP products forum

DLPLCR4500EVM: Aspheric Lens replacement Optics Path Modifications / Specs