I'm looking for some detailed technical information regarding illuminanion module in DLP LightCommander.
1. Is it possible to achieve a schematic diagram of the illumination module od the DLP LightCommander?
2. The next question is to achieve symbols of the illumination LED sources and the data sheets for the IR, R, G, B LEDs.
Thanks for any help in advance!
Hello, and welcome to the TI DLP & MEMS E2E forum.
I can provide some of what you ask for. I have attached a pdf file which shows a "schematic" of the DLP LightCommander optical and illumination path.
The LEDs used are:
R G B - Luminus PhlatLight PT54 (http://www.luminus.com/products/PT-54.html)
IR - OSRAM LED SFH4750 IR (850 nm) (http://catalog.osram-os.com/)
Thank you very much for your help!
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.