• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 27 subscribers
  • Views 420 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RE: DLP LightCrafter & the 3D Machine Vision Reference Design

user4176590
Prodigy 20 points

Hi Fizix,

I am a new in DLP. I want to learn some knowledge about 3D machine vision, so I chose the DLP Lightcrafter module.

TI has two modules, the DLP Lightcrafter, and the DLP Lightcrafter4500. I want to know the difference between them.

I know DLP Lightcrafter4500 module can realize the 3D machine vision reference design.  Can the DLP Lightcrafter module also realize the 3D machine vision reference design?

 Best regards

  • 0
    TI__Mastermind 43135 points

    Hello and welcome to the DLP section of the TI-E2E community.

    We are actively exploring which of our chipsets might be able to work with the 3D Machine Vision Reference Design.

    Since the source code is available, it may be possible for you to make modifications to operate with the original LightCrafter.

    Continue to check back periodically regarding this. 

    Fizix

  • 0 in reply to Fizix
    Prodigy 20 points

    Hi Fizix,

    Thank you very much,I have read the DLP Lightcraft User's Guide,It can also realize the 3D machine vision,I determine to buy that.

    If I have any problem I will ask you for help.  :-)

    Best regards