This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

3D Scanning based on DLP4500 EVM

Other Parts Discussed in Thread: DLP4500

hI,everyone.

I have a DLP4500 EVM. I want to use it to do 3D scanning of my hand or face. I read part of document of Accurate Point Cloud Generation. I don't know whether it fit for me. (http://www.ti.com/lit/ug/dlpu019/dlpu019.pdf)

Based on this text, i installed all softwares as guided. But i want to use a different camera.

I have three cameras. But the "3D Scanner_LCr4500_PGcam" cannot connect with them.

(1)DMK31BF03  http://www.theimagingsource.com/en_US/products/cameras/firewire-ccd-mono/dmk31bf03/

(2)DMK31BU03 http://www.theimagingsource.com/en_US/products/cameras/usb-ccd-mono/dmk31bu03/

(3)GT1290C  http://www.alliedvisiontec.com/us/products/cameras/gigabit-ethernet/prosilica-gt/gt1290.html

Anyone has any suggestions? If you have more relevant documents, please let me know.

Thank you.

Zichao Bian