0.7 XGA DMD

Liam,

Please contact one of the DLP Design Houses for information about, and to purchase, a 0.7" DMD. These will be associated with the Discovery D4100 development kit.

The list of DLP Design Houses can be found at http://ti.com/mems - look under "DLP Technology"/"Getting Started"/"DLP Design Houses". The DLP Design Houses marked with the asterisk are able to help you with the D4100 kits.

Could you perhaps tell me more about your intended use for the DMD? That is, what is your application?

Best regards,

Pascal

Hi Pascal,

 The DMD will be used within a microscopy system to provide targeted illumination of samples. The 0.7" XGA DMD better suits the optical requirements of such a system and we would hope to control this DMD by a customised FPGA solution rather than TI's DMD controller. Is it possible to purchase the 0.7" DMDs separately from the kits? If so, do you know roughly what sort of price they sell for?

 Thanks,

Liam

Liam,

Thank you for telling me what your application area is. If you feel that it would be helpful to talk directly about your specific microscopy application, we could arrange to communicate off forum. Let me know.

With regard to your question about the 0.7" XGA DMD - I must refer you again to our DLP Design Houses. Only they will be able to answer your questions about purchasing this DMD.

Best regards,

Pascal

Hi Pascal,

Yes, it would be useful to discuss the microscopy application off forum.

Thanks,

Liam