DLP & MEMS

Browse by Tags

DLP & MEMS

Welcome to the DLP & MEMS Section of the TI E2E Support Community. Ask questions, share knowledge, explore ideas, and help solve problems with fellow engineers. To post a question, click on the forum tab then "New Post".

Sign In to Post
Tags
You have subscribed to this tag. To view or manage your tag subscriptions, click here.   Close
You have unsubscribed from this tag. To view or manage your tag subscriptions, click here.   Close
You are currently viewing:
application
Related Posts

  • Forum Post: Re: what is the light intensity delivery threshold for DMD

    ShengWang8120
    Thank you for the information. We will expand laser beam to about 1cm^2, even though the femtosecond laser still make very strong peak flux to DMD (the peak flux we need is around the order of 100000W/cm^2). The laser pulse is about only 100 femtoseconds long, then after about 10 nanoseconds drak duration...
    on Nov 30, 2008

  • Forum Post: Re: what is the light intensity delivery threshold for DMD

    Fizix
    I also calculate the average power of what you are describing to be at about 1W/cm^2, which if the beam were continuous at this power is within the ability of the DMD to dissipate. This agrees with your numbers. The DMD should be able to handle the load; I estimate each pulse in the operation you...
    on Dec 2, 2008

  • Forum Post: Re: Upcoming DLP Conference at Photonics West 2010

    GPark
    Hi DLP users! This is a friendly reminder that abstracts for SPIE Photonics West 2010 are due 13 July 2009 . The conference will be held in San Francisco from January 23-28, 2010 . Please go to the following link to learn more and to submit your abstract Emerging DMD-Based Systems and Applications...
    on Jun 19, 2009

  • Forum Post: Re: Using the Explorer software

    Fizix
    Hello Rahul, You can certainly do applications without the Explorer software. You can write your own wrapper for the ActiveX control and/or the DLL if you wish to operate through USB. Please refer to the "Discovery 4000 Controller Board API Programmer's Guide" under the D4000 link on...
    on Jul 8, 2009

  • Forum Post: What applications are you exploring using the DLP Discovery kits?

    GPark
    I am sure many users are interested to hear what different applications the DLP Discovery kit are being used for. Will you share your application?
    on Nov 11, 2008

  • Forum Post: what is the light intensity delivery threshold for DMD

    ShengWang8120
    I am going to deliver fsec Laser (100 fSec pulse, 80M Hz repeatation rate, around 800nm to 900nm wavelength) to DMD for my application, does anyone know the peak intensity damage threshold of the DMD?
    on Nov 26, 2008

  • Forum Post: Home Theater Applications For Dark Chip 3 Vs. Dark Chip 4

    MarcM
    Hello. I work for Stewart Filmscreen and recently I have been questioned by a few dealers about the differences between these 2 units. The main concern is that our dealers have 'heard' that the dark chip 3 is designed more for dedicated theater environments, and the Dark Chip 4 is intended...
    on Feb 24, 2010

  • Forum Post: DMD for 248nm laser with 175mJ/cm2 intensity?

    Syed Nadeem Akhtar
    Hi! Are DMDs available to work with lasers at 248nm and 175mJ/cm2 intensity without getting damaged and without introducing much loss in the intensity? If no, can TI (or which other manufacturers) make these?
    on Nov 24, 2011

  • Forum Post: Possibility for TI to provide special resolution DMD chips

    Teddy Yan
    Hi there, I wonder if it is possible for TI to develop special resolution DMD chips, i.e., resolution such as 2048x768, 2800x1050 or 3200x1080. Who would be the contact point at IT to talk about this? Thanks! Teddy
    on Jan 16, 2012

  • Forum Post: Can File(PortabilityLayer.dll) be used in x64 configuration?

    Peihao xu
    Hi, I need to use these function: RunBatchFile(String name, Boolean stopOnError) and InitPortabilityLayer (Byte logLevel, Byte detail, OutputCallback callback), which are defined in PortabilityLayer.dll. But after compiling, the error exists, the error shows these two functions are unresolved external...
    on Jul 7, 2012

All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.

Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Terms of Use of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Terms of Use of this site. TI, its suppliers and providers of content reserve the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.

TI Worldwide | Contact Us | my.TI Login | Site Map | Corporate Citizenship | mobile m.ti.com (Mobile Version)

TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs and
embedded processors, along with software, tools and the industry’s largest sales/support staff.

© Copyright 1995-2013 Texas Instruments Incorporated. All rights reserved.
Trademarks | Privacy Policy | Terms of Use