• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 27 subscribers
  • Views 961 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IntelliBright GUI control ,"Show RGB intensities on-screen" of 4710EVM

Rossinag
Expert 1705 points
Other Parts Discussed in Thread: DLP4710, DLPC3439

Dear All,

Thank you for your support.

Please let me ask you about LightCrafter Display 4710(G1).

With regard to the 4710EVM ,turuning on GUI "Show RGB intensities on-screen" make five bars on top of the  displayed image at right/left two parts.

How can we understand the right/left two parts of five bars as real-tine view of the CAIC operation? Dose it relate two DLPC3439 controller for a DLP4710 DMD?

Please advice.

Best regards,

Rossinag

  • 0
    TI__Intellectual 2850 points
    Hello Rossinag,

    Thanks for your interest in DLP products.
    We're looking into this and will get back.

    Thanks,
    Sepeedah
  • 0
    TI__Intellectual 2850 points
    Hello Rossinag,

    When using this function, 5 bars appear on-screen from which the first two can be ignored and the other three show the intensity of red, green, and blue LEDs. These intensities will change based on the CAIC setting that you choose on the GUI.
    The left and right bars correspond to the slave and master controllers. Assuming Long-axis flip is enabled in your project by default, Master will be on the right side of the display. Please note that the bars corresponding to the master controller are the accurate one.

    Please let me know if you have further questions.
    Best,
    Sepeedah