DLP4710: How to access the flash memory to load your own patterns in DLP 4710

Ritaban Chowdhury

Prodigy 120 points

Part Number: DLP4710

Hi,

For my application I need to load my own pattern into DLP 4710 flash memory. Can anyone tell me how to achieve that?

over 6 years ago

0 Sepeedah Zadeh over 6 years ago

TI__Intellectual 2850 points

Hello Ritaban,

If you are using the 4710G2-EVM please make sure you are using v5.0 of the Lightcrafter GUI found on this page:

I would recommend taking a look at the 4710G2-EVM GUI user's guide to understand how the GUI works and what functions you can perform with it. The GUI allows you to customize some of the features in your flash image and upload it to your board (refer to p.12,15 of the guide). One of the options is to update the splash screens stored in flash.

Hope this helps with your purpose.

Best,

Sepeedah

0 Ritaban Chowdhury over 6 years ago in reply to Sepeedah Zadeh

Prodigy 120 points

Thanks again Sepeedah.
Ritaban.

DLP®︎ products

DLP products forum

DLP4710: How to access the flash memory to load your own patterns in DLP 4710