• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 27 subscribers
  • Views 843 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLP4710: Made a specification table for my needs, please anyone tell me if this is viable

john smith
Prodigy 40 points
Part Number: DLP4710
Other Parts Discussed in Thread: DLPC3439, DLPA3005

Hello people of TI

I made a specification table for my needs link to picture: http://imgur.com/a/pslaV

Can anyone please tell me if these specifications are ok and viable or if they are not possible. 

Thanks!

  • 0
    TI__Intellectual 2850 points

    Hello John,

    Welcome to the E2E forums and sorry this question had been missed. It seems it was not in the appropriate forum.

    Many of the specs you're inquiring about such as contrast ratio and power consumption will depend on the overall system design, but I will try to verify as much as I can.

    Please note the following resources to get a better understanding of the system:

    The brightness and resolution mentioned can be supported by the DLP4710. Note for 1920x1080 resolution the supported frame rate would be 5-62Hz based on the DLPC3439 datasheet. Regarding size I'm not sure what size you are referring to, but the dimensions of the DLP4710 can be found in the data sheet (24.50-mm × 11-mm × 3.80-mm) and any system with this DMD will require 2 DLPC3439 controllers and the DLPA3005 LED driver.Also note that at a minimum a Flash part is needed to store the software and firmware to control each DLPC3439 controller.

    The mentioned power consumption may be achievable based on how you design other parts of the system. The other mentioned parameters will depend on how you design the optics. You can find a list of optical module manufacturers  and design houses for more info and design support.

    Hope this helps.

    Best,

    Sepeedah