• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 27 subscribers
  • Views 443 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLPC3435: Can the DLPA200x support multiple DLPC3435 devices?

Stephen Craig
Intellectual 440 points
Part Number: DLPC3435
Other Parts Discussed in Thread: DLPA2005, , DLP2010

Can you run power multiple DLPC3435 devices using a single DLPA2005 device?

Thanks,

-- Stephen Craig

  • 0
    TI__Mastermind 28005 points
    Stephen,

    Welcome to the E2E forums, and thanks for your interest in our DLP technology.

    The DLPA2005 is used to both report system status to the DLPC3435 as well as drive the LEDs interfacing with the DLP2010 WVGA DMD. Due to the inter-device communication necessary to faciliate this, the DLPA2005 is only capable of communication with a single ASIC and DMD at a time.

    As such, you cannot power multiple DLPC3435 devices with the DLPA2005. I apologize for the inconvenience.

    Best Regards,
    Philippe Dollo
  • 0 in reply to Philippe Dollo
    Intellectual 440 points
    That you, kindly for the prompt response. This was very helpful.