This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLP2010: DLP3010

Part Number: DLP2010
Other Parts Discussed in Thread: DLPC2607

We like to design a cost effective projector.There are so many tutorials are given.But still I didn't get clear idea on how to design a projector.

I am a beginner.Please give me a guidance that how to design a projector.Because some projectors are available for Rs.4500.But chip set and optical modules are comes more than Rs.12000.How it is possible.

Give a clear idea that what are the hardwares and software we need to purchase and how to go for product design.Give me step by step guide.

 

  • Hello Vijayabaskar,

    Thank you for your interest in DLP technology.

    The DLP chipset price will vary depending on the specifications you are looking for. If you are looking for a cost-effective chipset to use in your design, I would recommend the 0.2 nHD chipset (which uses the DLPC2607 controller), which you can learn about by calling your local TI DLP sales representative. Ask about part number 3664-203BT (which is the 0.2 nHD).

    If you prefer a part with higher resolution capabilities than the 0.2 nHD, I would also suggest you look at the 0.2 WVGA chipset, which utilizes a newer architecture for better performance.

    I hope this helps. Let me know if I can assist you further.

    Best Regards,

    Philippe Dollo